Optika Italy B-380 Series, Инструкция по эксплуатации

Страница: 7 / 42

Pagina 7
7.1 Assembling the microscope
1. Insert the Bertrand lens
①
in the frame and lock
the locking screw
②
with the provided Allen
wrench. (Fig.1)
2. Insert the optical head on the Bertrand lens and
lock the locking screw with the provided Allen
wrench. (Fig. 2)
3. Insert both eyepieces into the tubes of the optical
head. (Fig. 3)
• One of the two eyepieces is equipped with
a crosshair for centering the entire optical
system. It is advisable to insert the eyepiece
with crosshair in the right eyepiece holder .
4. The condenser is pre-installed before leaving the
factory. To remove the condenser use an Allen
wrench diam. 1,5 and operate on the locking
screw placed on the right side of the condenser
holder.
5. Remove the dummy slider from Bertrand lens
and insert the analyzer
③.
(Fig. 4)
Fig. 3
Fig. 4
Fig. 1
①
②
③
Fig. 2