
M-10
Specifications Manual
7
6. Electrical Specifications
6.1.
USB Power Supply
Power supply
: 500 mA High-Power
Current consumption
: 420 mA ( max ) during reading operation
: 150 mA ( typ ) in standby
* The current consumption was measured at 25°C.
6.2.
AC Adapter Specifications
For RS-232C (D-Sub 9pin) model
6.2.1.
Input Specifications
Power supply voltage
: AC 90 ~ 265 V
Power supply frequency : 47 ~ 63 Hz
Maximum current
: 0.5 A ( max )
6.2.2.
Input Specifications
Output voltage
: 6.0 V ±5% / Output current: 0 ~ 2.0 A ( max )
Power ripple
: 100 mV p-p ( max, rated load )
7. Interface Specifications
The M-10 supports four types of interfaces; USB-HID, USB-COM and RS-232C.
7.1.
USB
The USB interface models have two specifications: HID (Human Interface Device Class) and COM
(Communication Device Class). With USB-COM model, VCP (Virtual Communication Port) allows
virtual serial communication and the commands can be transmitted from the host computer.
* Multi byte character data or images can be transmitted via USB-COM interface.
7.1.1.
USB Interface Specifications
Power supply
: 500mA (High-Power).
Speed
: USB2.0 Full speed ( 12 Mbps )
Interface
: USB-HID / USB-COM (VCP)
* The USB model is bus powered and no AC adapter is required.
* Images cannot be transmitted via the USB-HID interface.
* Multi byte character data can be transmitted via USB-HID interface with settings.
* Make sure to connect to a High-power bus (500 mA max) USB terminal.