opticis IPKVM-500-ED, Руководство пользователя

Страница: 19 / 26

- 19 -
4) Multicast streaming and Blocking function
♦ Multicast streaming (1: N) with blocking function ‘disabled’
Please
set blocking function ‘disabled’ on PC Program (Remote Manager), and then you may
see status of hosts (TXs) on the GUI of a client (RX).
- Available: Hosts (TXs) are ready to connect with the client. (TX)
- Currently connected: this client (RX) is already connected to the host (TX).
Note: When IPKVM-500-ED works as multicast mode, many client users may connect to a host.
But first user who uses keyboard and mouse at first has priority. If the user does not use
the keyboard and mouse for three (3) seconds, priority can be changed to another user.
♦
Unicast streaming (1:1) with
blocking function ‘enabled’
Please
set blocking function ‘enabled’ on PC Program (Remote Manager). You may see
status of hosts (TXs) on the GUI of a client (RX) as below.
- Available: The hosts (TXs) are ready to connect with the client.
- Currently connected: The client (RX) is already connected to the host.
- Not available, in use (Red color): These hosts are already connected to other clients (RXs)
individually, user cannot access to these hosts.
5) OSD display
Device information of TX and RX will be shown on the monitors for users or operators. You can
inserts up to 32 characters including numbers and English alphabets.
Note: If you do
n’t want to show it on display, please don’t insert information at the ‘Device
Setti
ng’ menu, or set ‘OSD’ to off at the ‘Advanced Setting’ menu.
You can see OSD messages on the display of the client (RX) as below.
▶
Device information of the host (TX): Source10
▶
Device information of the client (RX): Place10