opticis IPKVM-500-ED, Руководство пользователя

Страница: 10 / 26

- 10 -
11. Remote Manager (PC Program)
Note: IPKVM-500-ED supports static fixed IP address, auto IP address and DHCP IP (Dynamic
Host Configuration Protocol: default) in IP network. Users can change auto IP to static IP
with host & client device setup of PC Program if there is no DHCP server.
Important: Without DHCP IP, Static IP ‘Class’ of Control PC should be the same as IP ‘Class’ of
network switch or devices (TX or RX).
1) Download the PC program
(1) Visit our website, www.opticis.com
(2) Click the PRODUCTS bar at the top of the page.
(3) Click IPKVM and IPKVM-500-ED step by step.
(4) Click and download the PC program file.
(5) To download it, please enter the password number: 0315.
2) PC Program Installation
Important: If you use IPKVM-500-EDs in intranet between routers, you need to check the IP
addresses, Gateway and Subnet Mask of the PC.
(1) Run the setup.exe in the Window Operating System.
(2) Follow on-screen instructions.
* To re-install or upgrade the PC Program, please delete the previous PC program on the
Control Panel of Window OS.
3) Access to menu of PC Program
(1) Run the PC program (Remote Manager)
(2) Four (4) menus: Device Setting, Advanced Setting, EDID read/write & Update Firmware.
Note: User can check the version of PC Program through the top of the menu bar. (Help

About)
Important: Before connecting all TXs and RXs in the network that have default IP addresses,
please modify information of each TXs and RXs one by one by connecting it directly PC
with Remote Manager.