DS-E Series
（
1~6KVA
）
User’s Manual
3
Table 1-2 UPS Main Performance Index
Index Model
DS6000E
DS6000EL
Rating Voltage (V)
230
Rating frequency (Hz)
50 or 60 (setup when leaving factory)
Input mode
Single-phase three-line
Input
Charact
eristic
Battery voltage (V)
120
Capacity (VA)
6000
Voltage (V)
230±2%
Frequency (Hz)
50 or 60
±
0.1%
（
Same as the input frequency
）
Waveform Sine
wave
Voltage distortion
factor
THD < 3% (Linear load)
Switching time (ms)
0
Overload capacity
105%~125% Load, lasting 60 seconds. 131%~150% Load, lasting 30
seconds.
≥
150% lasting 300 milliseconds
Output Charact
eristic
Output mode
Terminal
Spare time
10 minutes (PC LOAD)
Rational configuration for long time delay
Charge recovery time
<12 hours (Standard time delay model)
Communication
interface
RS232 interface supports UPS power management software and SNMP protocol
Panel display
LED displays operation status and LCD displays parameter of UPS
Warning function
Battery low voltage, abnormal power supply, UPS malfunction
Protection function
Battery low voltage protection, overload protection, short-circuit protection and
excess temperature protection
Frequency noise (dB)
< 55
Working temperature
0 ~ 40
℃
Relative humidity
0 ~ 95%, No condensation
Size (mm)
(H × W × D)
700
×
253
×
637 500
×
253
×
637
Other Charact
eristics
Weight (kg)
95
30
Mark: -EXT is with external battery connector
◆
Specifications are subject to change without prior notice.
1.4 Primary Functions and Characteristics
1
．
Intelligentized RS232 communication function: With RS232 standard
data interface and UPS power management software, realize three
remote-control functions between computer and UPS, computer
supervises UPS operation and electric parameters, and realize
