DS-E Series
（
1~6KVA
）
User’s Manual
9
②
“INV.” : Inverter normal, light on, abnormal off.
③
“OUTPUT” : UPS has output, light on; no output off.
④
“BYPASS” :UPS in status of bypass supply, light on; in status of inversion, off.
⑤
“FAULT” :UPS fault, light on; normal, off;
⑥
LCD Display
⑦
Select”: When UPS normal, LCD displays normal output voltage. If the button pressed, the
background light on and the LCD display will show input voltage, input frequency,
output power, UPS status etc. In addition, when in battery inversion model, press the
button for 2 sec, the interval beep can be cancel but warning audio in the status like
battery low-voltage etc.
⑧
“ON” :When UPS is shutdown, press the button for 0.5 sec, UPS starts up. When UPS is
running, press the button for 0.5 sec, UPS will enter battery test model. When battery
voltage reaches the low-voltage point or test time last 10 sec, UPS will stop the
function.
⑨
“OFF” :When UPS is running, press the button for 0.5 sec, UPS will shut down.
Front and rear panel structure of the main unit of DS6000E and DS6000EL are illustrated in Fig.
2-4 where standard-delay-model DS6000E\DS6000EL stays and Fig 2-5 where long backup time
model DS6000EL stays.
