WIRELESS GATEWAY QUICK-START GUIDE | 4
You are ready to initialize your ATM. Once booted, perform a balance in-
quiry. If this transaction fails, repeat steps 1-3 to verify correct program-
ming settings. If you are still unable to perform a successful balance in-
quiry, call OptConnect at (877) 678-3343 for assistance.
TCP/IP Setup - Hantle (Tranax) ATMs
Hantle (Tranax) ATMs capable of TCP/IP communications include:
MB2500, 1700W, C4000, X4000, C4010T
Once the physical installation is complete, enter the Operator Menu of
your ATM using the Master Password. If your ATM menus appear differ-
ently than described below, please call OptConnect (877) 678-3343 for
further assistance.
STEP 1
•
Change the ATM communication mode from Dial-Up to TCP/IP.
•
Customer Setup -> Change Processor -> Communication:
Standard TCP/IP*
•
Customer Setup -> Change Processor -> Standard 3 Option -> CRC
En\Disable:
Disable
•
3(x)
Cancel to Return
STEP 2
•
Define TCP/IP parameters for the ATM.
•
System Setup -> Device Setup -> ATM TCPIP Setup
Change TCPIP Mode:
Static IP
IP Address:
192.168.1.91
Subnet Mask:
255.255.255.0
Default Gateway:
192.168.1.90
******SELECT APPLY******
•
3(x)
Cancel to Return
*For Switch Commerce, First Data, and
Elan use Visa Framed
