Optal 4 Glass 2 burners Скачать руководство пользователя страница 130

Страница: 130 / 166

15 / 65

11 Mertik Maxitrol GmbH & Co. KG,

LIS

NOTICE

Replacement handsets for CSA models also must

have the same part number (see label).

GENERAL NOTES

Wiring of valve and receiver must be completed be-

fore starting ignition. Failure to do so could damage

the electronics.

Radio Frequency Handset

433.92 MHz for Europe; 315 MHz for U.S. (FCC ID:

RTD-G6R) and for Canada (IC: 4943A-G6R).

This device complies with part 15 of the FCC Rules. Op-

eration is subject to the following two conditions: (1) This

device may not cause harmful interference, and (2) This

device must accept any interference received, includ-

ing interference that may cause undesired operation.

party responsible for compliance could void the user’s

authority to operate the equipment.

Figure 22: Receiver Reset Button

(First time use only.)

Radio Frequency Handset

A code is selected automatically for all Mertik Maxitrol

electronics from among 65,000 random codes available.

The receiver has to learn the code of the handset:

▪

Press

and the second beep is long. After the second beep,

release the reset button.

▪

Within the subsequent 20 seconds press the (small

hear one long beep, this indicates the code learning

sequence has failed or the wiring is incorrect.

NOTE:

This is a one time setting only, and is not re-

quired after changing the batteries of the hand-

set or receiver.

Batteries – Handset:

▪

1 x 9V (quality alkaline recommended).

▪

Low battery indicator on handsets with display.

▪

Handsets without display: the red LED gets darker.

▪

Battery replacement is recommended after 2 years.

Batteries – Receiver:

▪

4 x 1.5V “AA” (quality alkaline recommended).

▪

Low battery indication: frequent beeps for 3 seconds

when motor turns.

▪

An AC Mains Adapter may be used instead of batteries.

▪

The module for fan speed control and light/dimmer in-

cludes mains power together with batteries in the re-

ceiver for automatic backup in case of power outage.

▪

Without using a mains adapter, battery replacement is

recommended at the beginning of each heating season.

Only the Mertik Maxitrol AC Mains Adapter or one

preapproved by Mertik Maxitrol can be used. Use of

other adaptors can render the system inoperable.

OPERATING INSTRUCTIONS

FOR OEM USE ONLY

Figure 21: Previous Handset

The handsets, receivers, wall switches, switch panels

and touch pads are not interchangeable with previ-

SETTING THE ELECTRONICS CODE

Light/Dimmer operation (page 17)

Fan operation (page 17)

Time setting (page 18)

Program timer setting (page 19)

Temperature setting (page 19)

°C/24 hour or °F/12 hour Clock

setting (page 18)

Fan level icon (page 17)

Solenoid Valve/Burner

OPEN and CLOSE (page 17)

ON/OFF Temperatures setting (page 19)

Battery status

Signal indicator

Modes of operation (page 18)

Figure 20

APPENDIX B

A p p e n d i x B

Содержание 4 Glass 2 burners







































































































































































Результаты поиска

Содержание 4 Glass 2 burners

Отзывы:

Похожие инструкции для 4 Glass 2 burners

Бренды по названию

Популярные бренды

Optal 4 Glass 2 burners, Руководство по установке и эксплуатации

Результаты поиска

Содержание 4 Glass 2 burners

Отзывы:

Похожие инструкции для 4 Glass 2 burners

Бренды по названию

Популярные бренды