Oppo BDP-105D (EU), Руководство пользователя

Страница: 38 / 100

34
ADVANCED OPERATIONS
Output Resolution
The BDP-105D supports multiple output resolutions. For a
detailed discussion on how to choose the best output resolution,
please refer to the
Select the Best Output Resolution section
on page 25 of this manual.
If you would like to change the output resolution, you may do so by
pressing the
RESOLUTION button on the remote.
1. Make sure the HDMI cable is properly connected.
2. Turn on the TV and adjust the TV to use its HDMI input port.
3. Make sure that the player is turned on. Although the output resolution can be changed while a disc is
playing, it is recommended that you stop playback and take out the disc before changing the output
resolution. Press the
RESOLUTION button. The Resolution Menu appears on the TV screen. If the
TV does not support the current resolution and you cannot see the Resolution Menu , the current
resolution is also displayed on the player’s front panel.
4. Use the UP/DOWN ARROW buttons to select the new output resolution. You may also press the
RESOLUTION button multiple times to cycle through the available output resolutions.
5. Press the ENTER button to apply the selected output resolution. If you do not want to change the
output resolution, press the RETURN button to exit and return.
The following output resolutions are available:
NTSC output:
4Kx2K Auto 1080p(60Hz/24Hz) 1080i 60Hz 720p 60Hz 480p 480i Source Direct
PAL output:
4Kx2K Auto 1080p(50Hz/24Hz) 1080i 50Hz 720p 50Hz 576p 576i Source Direct
NOTE
x
Some TV sets may not support one or more output resolutions. If an incompatible output
resolution is selected, you will get a blank screen or an error message. If this occurs, please
select an output resolution that is supported by the TV.
x If you cannot get a picture using HDMI, please remove the HDMI cable and connect the
player’s DIAG (diagnostic) output to the TV using a regular composite video cable, and then
use the
Setup Menu to adjust the player settings.
x
Due to the “Analogue Sunset” provision, as of January 1, 2011 all Blu-ray Disc players made
and sold going forward will not be able to pass high definition video (720p, 1080i, or 1080p)
via Component Video outputs. Because of this, we have removed the Component and
RESOLUTION
DARBEE