background image

Operation

33

OMATION® Series 410 Envelopener™ Operator Manual

OPEX Corporation

 4.1.1.1.1. Arrow button functionality

Up Arrow Press - 

will allow you to navigate up through a column of data. When 

the upper item within the column is highlighted and you press the up key, the 
list of data is shifted down by a row and the previous line of data is displayed. If 
the up arrow is pressed while on the first row of data, then the cursor will move 
left to the first item in the table. If the first item is selected, then the cursor will 
move to the last item in the list.

Up Arrow Hold - 

Pressing and holding the up arrow will display the previous full 

page of data. The screen will wrap to the last page of data when you hold the 
up arrow while the first page of data is displayed. When the screen wraps to 
the last page, the last item in the list will be highlighted.

Down Arrow Press - 

will allow you to navigate down through a column of data. 

When the lower item within the column is highlighted and you press the down 
arrow, the list of data is shifted up by a row and the next line of data is 
displayed. If the down arrow is pressed while on the last row, the cursor will 
move left to the last item in the table. The screen will wrap to the first item in 
the list if you press the down arrow when the last item in the list is highlighted.

Down Arrow Hold - 

Pressing and holding the down arrow will display the next full 

page of data. The screen will wrap to the first full page of data when you hold 
the down arrow while the last page of data is displayed. The first item in the list 
will be selected when the screen wraps to the first page.

Left Arrow Press - 

will shift the highlighted selection one column to the left. If the 

selected item is in the first row and the left arrow is pressed, then the last item 
in the previous row will be selected. In addition, if the first item on the page is 
highlighted and the left arrow is pressed, the list is shifted down and the 
previous line of data is displayed. Pressing the left arrow while the first item on 
first page is highlighted will cause the screen to wrap to the last item in the list.

Left Arrow Hold - 

Left arrow hold will continuously shift the selection one item to 

the left until the key is released. It will work the same as the left arrow press.

Right Arrow Press - 

will shift the highlighted selection one column to the right. If 

the selected item is in the last row and the right arrow is pressed, then the first 
item in the next row will be selected. In addition, if the last item on the page is 
highlighted and the left arrow is pressed, the list is shifted up and the next line 
of data is displayed. Pressing the right arrow while the last item on the last 
page is highlighted will cause the screen to wrap to the first item in the list.

Содержание OMATION Envelopener 410 Series



































































Отзывы: