Opex Model 72, Руководство оператора

Страница: 74 / 104

74 Managing Operators and Jobs
Model 72™ Operator Manual
OPEX Corporation
5.4.8. CUP OPEN AMOUNT
This parameter is used to determine how wide the extract cups should open an
envelope (Figure 5-33).
Figure 5-33: Cup Open Amount screen
The actual opening size varies, based on the setting of the Extract Cup Max
Open Delay machine parameter. The cup open amount can be adjusted by
moving the cursor with the right and left arrows from 1 (small opening) to 10
(large opening) and pressing
Enter .
5.4.9. SIDE/TOP CUT OPTION
These job parameters are used to identify where the cutters should be set
(Figure 5-34).
Figure 5-34: Cut Option screens
This does not actually adjust the cutters - it is used to inform the operator
where the recommended setting for the cutters should be. It is the
responsibility of the operator to set the proper cut depth. The recommended
cut amount can be adjusted by moving the cursor with the right and left arrows
and pressing
Enter .