Opex Model 72, Руководство оператора

Страница: 68 / 104

68 Managing Operators and Jobs
Model 72™ Operator Manual
OPEX Corporation
5.4.1. JOB NAME
Once a job has been created, you can use this option to change the name of
the job. The steps for renaming the job are identical to those described in
“Adding a new job” on page 64 .
5.4.2. ACTIVATION MODE
This job parameter determines the method used for scanning an envelope in
the extraction section. When the criteria for the particular mode is satisfied, the
envelope is declared empty and is transported to the Verifier.
To make an activation mode change, use the Arrow buttons to select
ACTIVATION MODE in the SELECT JOB OPTION menu and press Enter . The
SELECT ACTIVATION menu will appear and the current activation choice will be
highlighted (Figure 5-23).
Figure 5-23: Select Activation screen
In CONTENT and DIFFERENTIAL modes, a sensor is used to check if an
envelope is empty.
Activation modes are:
• Content mode - When content activation is selected, envelopes will not
leave the extraction area until they are completely empty. This mode is the
preferred choice when most of the envelopes in a job exhibit a consistent
thickness. When selecting content activation, make sure that any slight