•
Using the key, it is possible to mechanically
enable the electric handle.
To activate the mechanic open release lever,
remove the grub screw that prevents the
complete rotation (see figure).
In this configuration, the key enables the
permanent mechnical activation of the electric
handle. To disconnect the open release lever,
use the key manually.
•
Fix the back plate with the appropriate screws
and make sure the fixing bushes are in the
correct position in front of the fixing holes on
the bar.
•
If one of the fixing bushes is placed to the
cylinder height, tighten the supplied nylons
gauge in the back part of the bush (see figure).
•
Reduce the spindle and the fixing screws as
per the indications supplied with 00428
instructions
•
Block the spindle with the appropriate grub
screw only if necessary.
