![background image](http://html.mh-extra.com/html/geovision/mlsh01-0/mlsh01-0_installation-manual_2215916001.webp)
May 13, 2011
1
MLSH01-0 Electromagnetic Lock
The MLSH01-0 is a surface mount electromagnetic lock featured with a built-in voltage spike
suppressor and a sensor. It can be applied for single-leaf or double-leaf doors.
Note:
The product should only be powered by a UL listed power supply.
Packing List
1.
MLSH01-0 electromagnetic lock x 1
2.
Magnet faceplate x 1
3.
Inner hexagon wrench x 1
4.
M8 (35mm) screw + black rubber
spacer x 1
5.
Hat nut x 1
6.
Galvanized steel rivet x 2
7.
Black rubber spacer x 2
8.
Aluminum shim x 2
9.
#10 (5/8”) screw x 2
10.
#10 (1.25”) screw x 8
11.
Washer x 2
12.
Stainless steel bracket x 1
13.
CU1201 screw + permanent magnet x 1
14.
M4 (6mm) screw x 1
15.
Inner hexagon nut x 1
16.
Aluminum tube x 1
May 13, 2011
2
Installation
Before installing, add the thread lockers to all screws. Firmly tighten the screws to avoid
fastening loosen.
1. Install the electromagnetic lock to the doorframe.
Note:
If the power switch is not wired between the DC source voltage and the magnet, it
will take longer to de-energize the magnet simulating residual magnetism.