Opengear MFC-8322-S, Руководство пользователя

Страница: 49 / 72

MFC-8322-S and MFC-OG3-N User Manual (Iss. 01) DashBoard Menus • 6–9
Network Tab
Table 6.7 summarizes the Network configuration options available in DashBoard for the
Network Controller Cards.
Table 6.7 Network Menu Items
Menu Title Item Parameters Description
Network
Frame Name
Configures the name displayed in
DashBoard for the frame the card is
installed in. The Frame Name is
automatically updated in the
Product tab.
NTP Server ##.#.#.#
This is the IP Address of the NTP server
used as a time source
Current DIP Switch # Indicates the position of the DIP Switches
Addressing Mode
Static
User defines the Network settings of the
card
DHCP*
DashBoard obtains network settings
automatically for the card
IP Address ##.#.#.###
Enables you to set the IP Address of the
card if the
Addressing Mode is set to
Static .
Subnet Mask ###.###.###.#
Enables you to set the Subnet Mask of the
card if the
Addressing Mode is set to
Static
Default Gateway ##.#.#.#
Enables you to set the Default Gateway of
the card if the
Addressing Mode is set to
Static
Apply
Applies and saves any changes made to
the
Network Settings
Cancel
Cancels any setting changes and resets the
Network Settings to the previous values
Ethernet Switch
- Port Status
(MFC-OG3-N
only)
Slot #
No link
Indicates there is no link to the network
for this card slot
Loop detected
Indicates that a network loop was detected
on the slot and the link was automatically
disabled by the MFC-OG3-N
Link up #M
Indicates a valid network link and
specifies the current link speed
Frame Ethernet Link up #M
Indicates that a valid network link is
detected on the Ethernet port located on
the back of the openGear frame; specifies
the current link speed