background image

6–10 • DashBoard Menus

MFC-8322-S and MFC-OG3-N User Manual (Iss. 01)

DataSafe Tab

Table 6.8

 summarizes the 

DataSafe 

options available in DashBoard for the MFC-OG3-N. 

This tab displays an array of cards based on the frame the selected card is installed in. 

Note

 — This tab is not available when using an MFC-8322-S.

Table 6.8  DataSafe Menu Items

Menu Title

Item

Parameters

Description

### [y]

a

a.

Displays the current slot name (###) and the slot number [y]. For example, Slot 5 [1]. The slot name is set in the 

Cards 

Slot Name

 field of the 

Setup

 tab.

Card Type and 
Software Rev

aaa-bbbb :: #.##

Displays information for the card 
currently installed in that slot; where 
aaa-bbbb represents the card name, and 
#.## represents the current software 
version of the card.

Correct Mismatch

<- Update Slot

Click this button to automatically update 
the slot with the new card information 
indicated in the 

Conflict

 field.

Conflict

When blank, this field indicates that the 
card currently in the slot has the same card 
type and software version as the saved 
DataSafe data.

##

Indicates that the software version or the 
card type do not match the saved data for 
the slot.

Disable

Selected*

Disables DataSafe for the selected slot. 
You may still monitor the slot, but you 
cannot update the slot with any new 
configuration data received when a new 
card is installed in the slot.

Cleared

Enables the 

Conflict

 field to display any 

card mismatch information. To update the 
slot, you must click the 

<- Update Slot

 

button.

Force

Click this button to load the current 
DataSafe data to the cards. This button is 
enabled only if a software version 
incompatibility exists.

Mask Warning

Selected

The card displays a warning in DashBoard 
if any of the card slots have a new or 
changed entry.

Cleared*

The card does not display a warning in 
DashBoard if any of the card slots have a 
new or changed entry.

Содержание MFC-8322-S









































































Отзывы: