11
Owner’s guide
Rev. 2.3
7.6 Volume control (learned IR remote only)
Using the learned IR buttons; the volume can be adjusted. When the system goes OFF or into
standby, the latest volume setting is stored and will be set when the system is switched ON again.
7.7 Factory reset
The factory reset function is to bring the unit back to the initial settings set by the factory. These
settings are MIXER mode with volume set to 60%. All learned IR commands are erased.
The reset function is activated by:
1.
Make sure the unit is ON
2.
Press the IR Learning/Factory reset button for more than 10 seconds
3.
Reset has been completed when the control hub reboots (LED turns OFF and then ON)
