Opalum Actiline, Руководство пользователя

Страница: 13 / 13

13 Owner’s guide
Rev. 2.3
8.1.3 RS232 commands table
Function
Command In hex Description
Power ON
pwr1 70 77 72 31 0D Turns on the hub
Power OFF
pwr0 70 77 72 30 0D Turns off the hub
Power Toggle
pwrt 70 77 72 74 0D Toggles the power of the off. On if off and
off if on
Volume Up
vol+ 76 6F 6C 2B 0D Increases the hubs output volume with 1
Volume
Down
vol- 76 6F 6C 2D 0D Decreases the hubs output volume with 1
Volume Set
vol[XX] 76 6F 6C xx
76 6F 6C 63
76 6F 6C 00
76 6F 6C 0F
76 6F 6C 5F Changes the volume to a specific number. It
accepts values from 0-63, in hexadecimal
numbers. So there are 100 volume steps.
Examples:
vol63, sets the volume to full
vol00, set the volume to zero
vol0f, sets the volume to a low level
vol5f, sets the volume to a high level
Source Next src+ 73 72 63 2B Changes input source, counting up
Source
Previous src- 73 72 63 2D Changes input source, counting down
Source Select src[X] 73 72 63 0x
73 72 63 00
73 72 63 01
73 72 63 02
73 72 63 03
73 72 63 04
73 72 63 05
Changes the input source to a specific
source. X is the source selected.
Sources are:
0
toslink1 (pink LED)
1 toslink2 (blue LED)
2 coaxial (yellow LED)
3 Bluetooth (green LED)
4 analog (light blue LED)
5 mixer (white LED)
Example:
src4, changes to analog input
Standby
Timeout
Enable sta1
73 74 61 31 Enables standby timeout, so the hub will
turn off if it receives no signal for 20
minutes.
Standby
Timeout
Disable sta0
73 74 61 30 Disables standby timeout, hub will never go
automatically to standby.