SAFETECH ST60-
X
SAFETECH ST60-
X
O p a l e - P a r a c h u t e s . c o m
Opale Aero System SARL - 23 rue de la Motte
62250 MARQUISE - France
[email protected] +33(0)981 144 387
© Copyright 2016 - Opale Aerosystem SARL - Tous droits réservés
O p a l e - P a r a c h u t e s . c o m
Opale Aero System SARL - 23 rue de la Motte
62250 MARQUISE - France
[email protected] +33(0)981 144 387
© Copyright 2016 - Opale Aerosystem SARL - Tous droits réservés
Parachute preparation and installation
Parachute preparation and installation
Arrange the parachute inside the tube, and make
sure that the lines and the parachute trailing edge
are placed upwards the tube.
Never placed the lines in the bottom of the tube.
A piston blocking situation and a non deploye-
ment could occur.
Take the lines end that remain outside the tube.
With your hands, Make 8 around 2 fingers, and make
sure not to roll them up.
Again divide equally the panels to the left and to the
right.
With the first half, do a simple S. And hold those pan-
els with a random mass.
Flip the whole thing delicately and do the same oper-
ation with the other side.
The second S is now placed on top of the first one.
Firmly hold the whole thing.
Do several S in the way of the parachute length, as
shown on the picture.
10
11
