SAFETECH ST60-
X
SAFETECH ST60-
X
O p a l e - P a r a c h u t e s . c o m
Opale Aero System SARL - 23 rue de la Motte
62250 MARQUISE - France
[email protected] +33(0)981 144 387
© Copyright 2016 - Opale Aerosystem SARL - Tous droits réservés
O p a l e - P a r a c h u t e s . c o m
Opale Aero System SARL - 23 rue de la Motte
62250 MARQUISE - France
[email protected] +33(0)981 144 387
© Copyright 2016 - Opale Aerosystem SARL - Tous droits réservés
Thank you for choosing Opale-Parachutes.
This user’s guide includes all the information you need to assemble and use your parachute rescue kit. A good
knowledge of your equipment will allow you to safely obtain most of its performances .Thanks for giving this
manual to the new owner in case you decided to sell your kit.
Best regards,
The Opale-Parachutes team.
Safety Information
By buying our material, you must have a liability insurance and you hereby accept the inherent risk of
flying radio-controlled models and drones.
Using our equipment in a bad way may increase risks. Neither Opale Aero System, nor any other seller
will be liable for any damage caused by any accident whatever the circumstances are. The way our
equipment is used is incumbent upon the final user, including towards the law.
Contents
•
Composition
of
the
kit 3
•
Specifications 3
•
Assembling
4
•
Parachute
preparation
and
installation
9
•
Transmitter
/
model
setting
13
•
Mounting on a drone (with the universal adapter)
13
•
Installation
on
the
DJI
Inspire
1 14
•
Flat
view
16
•
Initiating
and
standby
procedures
17
•
Maintenance 17
Composition of the kit
Specifications
Warranty
The parachute kit is warrantied against any manufacturing default.
If, while using, the pilot cut or damage a bridle, tear any part of the parachute, repair and replacement of
damaged parts are not taken in account by the warranty and the user will be charged for it.
This kit dedicated to limit the energy of an impact, the user cannot in any circumstances from Opale Aero
System any compensation or allowance if his machin is damaged.
Kit Content:
•
1 x 1.8m2 (19.4ft2) parachute
•
1 x ejection carbon tube
•
1 x hardware and accessories kit
•
1 x spring
•
1 x carbon piston
•
1 x neopren cap
•
1 x “Remove Before Flight” pin
•
1 x servomotor
Tube:
•
Height: 150mm / 5.9in
•
Diameter: 60mm / 2.4in
•
Material: Carbon mat 3K
•
Total weight: 220gr / 0.49lb
Servomotor:
•
Size: 29x13x30mm / 1.1x0.5x1.2in
•
Tension: 4.8 à 7.2v
•
Power consumption: 400mA ( armed)
•
Sprocket: steel, on bearings
•
operating temperature: -20°C à +60°C
•
Connector: UNI
•
Wire length: 215mm / 8.5in
•
Signal: PWM
Spring:
•
Material: Steel
Parachute:
•
Wingspan: 1.8m2 / 19.4ft2
•
Lines: Dynema
•
Opening resistance without rupture: 60kg /
132.3lb
•
Silicon nylon fabric 20D ultralight 32gr/m2
•
Fixation line Aramid 300daN
2
3
