background image

SAFETECH  ST60-

X

SAFETECH  ST60-

X

O p a l e - P a r a c h u t e s . c o m

Opale Aero System SARL - 23 rue de la Motte

62250 MARQUISE - France

[email protected] +33(0)981 144 387

 

©  Copyright 2016  - Opale Aerosystem SARL - Tous droits réservés

O p a l e - P a r a c h u t e s . c o m

Opale Aero System SARL - 23 rue de la Motte

62250 MARQUISE - France

[email protected] +33(0)981 144 387

 

©  Copyright 2016  - Opale Aerosystem SARL - Tous droits réservés

Parachute preparation and installation

Parachute preparation and installation

Installation on a drone ( with universal adapter)

Slide the 8 on top of the parachute.

Cover the tube with the neopren cap.

Tighten it firmly.

Note: Make sure that the fixation line is correctly 

placed between the tube and the cap.

Never place the fixation line through the cap.

In locking status the piston is locked with the pin. The 

servomotor horn can have an angle from 45 to 70° 

(the angle formed by the servomotor plan and the 

horn).

In ejection status, the angle formed has to be -45°.

The pin fully release the arming rod.

To do an easy installation on different kind of frames, 

use the universal holder (sold separately).

Thanks to its multiple holes, it allows to easily install 

the tube on most of the frames sold on the market.

Choose a solid and steady anchorage, in order to not 

generate vibrations on the frame.

Use 3 CHC M3x10 screws with M3 nuts to attach the 

tube on the holder.

12 

13 

Содержание SAFETECH ST60-X










Отзывы: