Onyx CTY2, Руководство пользователя

Страница: 48 / 69

OPERATING iNSTRUCTIONS
4
8
CHARGE CYCLE BENEFIT
Increasing the charge cycles also means that the electrolyte that is between the anode and cathode will be healthier for
the electrons to pass through. Which means better current draw, lower sag levels, and lower cut off levels.
INCREASE CHARGE CYCLES WITH THE STOCK CHARGER
Increase the charge cycles from 800 to 1500 with the stock Onyx CTY2 charger by following the method below.
•
When not riding, maintain the battery charged to 67.7 volts (82%) on the display by unplugging the charger
when the charge reaches approximately 67.7 volts.
•
Full charge for 87 minutes (one and a half hours) before riding to go from 67.7 volts (82%) to 70.7 volts (97%)
then unplug the charger when the charger light turns green.
CHARGING WITH THE STOCK CHARGER
The normal charging process with the Onyx CTY2 stock charger is to unplug the charger when the charger light turns
green, which only charges the battery to 97%. This, in turn, is slightly less stressful on the battery cells than being
charged to 100% (71.4 volts). Being charged to 97% is good for about 800-1000 charge cycles.
BATTERY CHARGER
CTY2 MODEL