Onyx CTY2, Руководство пользователя

Страница: 32 / 69

OPERATING CONTROLS
32
LEFT SIDE CONTROLS
REAR REGENERATIVE BRAKE
The left brake lever not only controls the rear mechanical brake, but it also controls the regen braking. To activate regen
braking you only need to depress the lever slightly to activate the switch. Regen is very effective in not only stopping
the bike but also recharging the battery. If you are able to use the regen brake to safely stop the bike every time you
can dramatically increase your range. The sensitivity of this braking will be fully adjustable in the upcoming mobile
application. Warning: regenerative braking should not be used as a reliable means of stopping the bike. While it works
almost every time regen braking can stop working suddenly especially if the battery is near a full charge because there
is no- where for the energy to go. Also when applying regen your throttle will be killed. So when you release the regen
brake lever make sure you are not giving the throttle any power. For these reasons always use regen braking with
extreme
caution.
HEADLIGHT SWITCH
To control the headlight you simply toggle the light switch up on the left hand control to activate the bright LED
projector beam. The running lights are always on for safety and only use 0.1v in 5 hours of use. The high beam
headlight does use more volts and will drain the battery slightly faster so only use when needed. Note that because
the headlight is very bright, make sure you adjust the light so that it is not angled up and obstructing other driver’s
vision.
(Fig. 4.2)
HORN BUTTON
The horn button is located on the left hand controls and to activate the horn you simply press the button. (Fig. 4.2)
BLINKER SWITCH
Each bike is outfitted with a blinker switch and blinkers. Note: You must only use 12v LED blinkers. (Fig. 4.2)
CTY2 MODEL