Onyx CTY2, Руководство пользователя

Страница: 55 / 69

BASIC MAINTENANCE
CLEANING
Regularly clean and lubricate all moving parts,
tighten nuts/bolts, and adjust as required. This
includes all steering parts, bicycle pedals,
suspension, and wheel parts.
(See General Information > CTY2 Torque
Specifications, page 27 )
CHECK YOUR NUTS + BOLTS
With any moving vehicle it is good practice to always
check your hardware before you ride. You can do a
visual by doing a full walk around the bike before every
ride and you should do a physical check after every
couple rides to make sure nothing is vibrating loose.
Most bikes that encounter rough terrain will need
attention more frequently.
CHECK YOUR ELECTRICAL
CHECK THE CONDITIONS OF YOUR WIRES
Inspect all wires for sheathing wear and loose connections.
ALARM KEY FOB BATTERY REPLACEMENT
Using a fine tip flat head screwdriver pop the two chrome
sides off, starting from the top of the remote. When those
are off, starting from the bottom, work your way around
the outside and the calm shell will open. The fob takes a
CR2032 battery.
BATTERY AND CHARGER MAINTENANCE
See OPERATING INSTRUCTIONS > BATTERY CHARGING,
page 52)
BATTERY
BATTERY CHARGER
MAINTENANCE
55