Onyx CTY2, Руководство пользователя

Страница: 34 / 69

OPERATING CONTROLS
34
KEY-FOB BUTTON LAYOUT
POWER ON / OFF / ARM
Each bike comes equipped with two key fob
remotes that can turn on and off the main power
to standby, and set the alarm. Note this does not
fully kill the power to the system which allows for
the alarm and clock to function. Once the battery is
removed or turned off you will need to first turn the
battery back on for the following to work correctly
again.
TURN OFF ALARM + POWER ON
1:
Press the Unlock button twice on the key fob
and two audible chirps should sound to confirm
you
have activated the system. (C)
2: Press the Bolt button twice to turn on the system
and listen for one chirp. The dash, and running
lights should illuminate immediately following this
step so long as the throttle power button is in the
ON position.
(D)
(See Right Side Controls - Throttle On / Off)
POWER OFF TO STANDBY (LOCKED BUT NOT
ARMED)
1:
Press the Unlock button twice on the key fob and
a audible chirp should sound to confirm you have
deactivated the system. The dash, and running lights
should turn off following this step if your power
button is in the on position.
(C)
ARMING THE ALARM
1:
Make sure you have followed the steps to power off
the system to standby.
2:
Make sure your power button on your throttle is in the
off position.
3: Press the Lock button once to arm the alarm. (A)
CTY2 MODEL