Onwa KV-290, Руководство по установке

Страница: 12 / 39

Convenient Operation:
Weather Channels
4.
5.
Press [16](9) to program the displayed channel as the Call channel.
Channel 9 (Call Channel)
Call Channel Programming
Press [▲] or [▼] to select a desired channel.
Press [CLR] to cancel and exit.
9
Scrolls
Displays
When the favorite channel function is turned ON, press [▲] or [▼] to
select the favorite channels in sequence in the selected channel
group.
The Favorite channels are set by the TAG channel setting.
Each regular channel group has a separate leisure-use Call channel
(Default Channel 9). The call channel is monitored during Tri-watch.
1. Press and hold [16](9) for 1 second to select the Call channel of
the selected channel group. “CALL” and Call channel number
appear.
2. Press [CH/WX] to return to the previous display, press [▲] or [▼]
to select operating channel.
The transceiver has 10 weather channels.
The transceiver can automatically detect a weather alert tone on the
selected weather channel while receiving on a regular channel or
while scanning.
1. Press [CH/WX] to select between weather channel and regualr
channel.
“ ” appears when a weather channel is selected.
“ ” appears when the Weather Alert function is in use.
2. Press [▲] or [▼] to select a channel.
Call channel is used to select Channel 9 (default), however, you can
program the Call channel with your most offer-used channel in each
channel group for quick recall.
1. Press [U/I/C] (both [▲] and [▼]) one or more times to select the
desired channel group (U.S.A., International or Canadian) to be
programmed.
2. Press and hold [16](9) for 1 second to select the Call channel of
the selected channel group.
“CALL” and the Call channel number appear.
3. Press and hold [16](9) again for 3 seconds (until a long beep
changes to two short beeps) to enter Call channel programming
mode.
Channel number starts blinking.
WeatherAlertFunctionOFF WeatherAlertFunctionON
Scrolls
Displays