ontime AVC118, Инструкция по эксплуатации

Страница: 15 / 27

SHENZHEN ONTIME TECHNOLOGY CO.LTD
15
Operation mode
The AVC118 will work in auto mode after power on. This
means that the controller will take the responsibility to monitor
the arc voltage and modify the torch height correctly during
plasma cut. In case of needed, you can Press the
AUTO/MANU key to enter into manual operation mode, and it
is your responsibility to maintain the torch height correctly.
Operational keys
MEMU --- Menu key
ENTR --- Enter key.
UP --- Move the lifter upward while standby.
Increase the value while parameter setup.
Increase the given arc voltage while cutting.
Select previous items while menu operation.
DOWN --- Move the lifter downward while standby.
Decrease the value while parameter setup.
Decrease the given arc voltage while cutting.
Select next items while menu operation.