Installing your OnStream SC30/SC50 Digital Tape Drive
11
6.
To help you with the vertical alignment of your OnStream Digital Tape Drive,
two spacer rails are included. If desired, attach the spacer rails by sliding them
onto the bottom left and right edges as shown in Figure 8.
Figure 8: Slide spacer rails onto bottom of drive (optional)
7.
Slide your OnStream SC30/SC50 Digital Tape Drive into the empty drive bay as
shown in Figure 9. You can mount your OnStream SC30/SC50 Digital Tape
Drive horizontally or vertically as necessary.
Figure 9: Slide your OnStream SC30/SC50 Digital Tape Drive into an empty drive bay.
Detail view
Spacer rail
installed
Bottom of drive
Remove drive bay
cover
Slide drive into
empty bay
SCSIInstallGuide.book Page 11 Tuesday, January 19, 1999 1:04 PM
