OnStar Gen 6, Руководство пользователя

Страница: 31 / 48

Page 29
Voice Commands/Speech Recognition
Tips for entering a phone number using
the Dial and Store commands
• Say the entire 7, 10, or 11-digit number and
wait for the system to respond. You do not
need to say "dial", "store", or "verify" after the
phone number.
• If you want to enter a number that is not 7, 10
or 11 digits, use the Digit Dial or Digit Store
commands.
• Do not pause between the digits. If there is a
long pause between digits, the system may
think that you have finished saying the entire
number.
• The system does not recognize the words
"hundred" or "thousand". Instead, you must
say each digit. For example, a number start-
ing with "1-800…" is pronounced "one-eight-
zero-zero…".
• The system often works better when the digits
are combined smoothly into a single phrase.
Try saying the entire phone number more rap-
idly.
• If problems continue when saying the entire
phone number, try using the Digit Dial or Digit
Store commands to enter one digit at a time.
If problems continue
Say each one of the syllables in the word clearly.
Don’t omit any of the syllables.