RC-E User Manual
Management Client (RC-E Manager)
1. Select the required preset position in the
Presets
tab's list of available preset positions for the camera.
2. Click
Edit...
. This will open the
Edit Preset
window:
3. The
Edit Preset
window displays a preview image from the preset position in question; use the navigation
buttons and/or sliders to change the preset position as required.
4. Change the name/number and description of the preset position as required.
Tip:
If using a name, make sure it is descriptive; the name of the preset position may later be used in
situations where you will not have access to a preview image from the preset position, e.g. when using the
preset in a
rule
(see "
Manage Rules
" on page 133).
5. Click
OK
.
Testing a Preset Position
1. Select the required preset position in the
Presets
tab's list of available preset positions for the camera.
2. Click
Test
.
3. The
Presets
tab's preview image will move to the selected preset position.
Tip:
If the preview image does not appear to move to the selected preset position when you click
Test
, verify
that preview image does not already show the selected preset position. In that case, try testing another
preset position first.
360 Degree Lens Tab (Camera Properties)
Use of 360° technology requires a dedicated ImmerVision 360° lens mounted.
In this way, 360° technology enables panomorph technology through an advanced lens.
The
360° Lens
tab lets you enable and configure panomorph support for the selected camera.
Enabling and Disabling Panomorph Support
The panomorph feature is disabled by default.
To enable/disable it, select/clear the
360° Lens
tab's
Enable panomorph support
check box.
Panomorph Settings
When enabling the panomorph support functionality, you must also select a Registered Panomorph Lens (RPL)
number from the
ImmerVision Enables
®
panomorph RPL number
list. This is to ensure identification and correct
configuration of the lens used with the camera in question. The RPL number is usually found on the lens itself or on
the box it came in. For details of ImmerVison, panomorph lenses, and RPLs, see
http://www.immervision.com/en/home/index.php
(see http://www.immervision.com/en/home/index.php -
http://www.immervision.com/en/home/index.php
).
You must also indicate the physical position/orientation of the camera in question. This is done by selecting its
position from the
Camera position/orientation
list.
Manage Microphones
On many devices you are able to attach external microphones; some devices even have built-in microphones.
Devices' microphones are automatically detected when you add the devices to your RC-E system through the
Management Client's
Add Hardware
(see "
Add Hardware (Cameras, etc.)
" on page 49) wizard, regardless of which of
the wizard's detection options you use.
On-Net Surveillance Systems, Inc.
85
