Onkyo TX-RZ3100, Руководство пользователя

Страница: 46 / 159

Enable or disable the equalizer function that corrects for distortion caused by the
acoustic environment of the room. If this is to be enabled, then normally you
should select "On (All Ch)", and to disable just the front speakers you should
select "On (ex. L/R)". The setting can be separately set to each input selector.
Equalizer:
Select "Preset 1" to "Preset 3" configured in "2. Speaker" ­ "Equalizer Settings" in
the Setup menu. The same sound field setting is applied all ranges when set to
"Off".
EQ for Standing Wave :
Select whether to enable or disable the standing wave control calibrated in "2.
Speaker" ­ "EQ for Standing Wave" in the Setup menu.
It cannot be set if the listening mode is Pure Direct.
Re­EQ, Re­EQ(THX):
Adjust the soundtrack that was processed to enhance its high pitch range, in order
to make it suitable for home theater.
In Re­EQ, the following listening modes can be used: Dolby Digital, Dolby Digital
Plus, Dolby Surround, Dolby TrueHD, Multichannel, DTS, DTS­ES, DTS 96/24,
DTS­HD High Resolution Audio, DTS­HD Master Audio, DTS Neural:X, DTS
Express, and DSD.
In Re­EQ(THX), the following listening modes can be used: THX Cinema, and
THX Select2 Cinema.
It cannot be set if the listening mode is Pure Audio or Direct.
Other
A/V Sync :
If the video is behind the audio, you can delay the audio to offset the gap. Different
settings can be set for each input selector.
It cannot be set if the listening mode is Pure Audio or Direct.
Music Optimizer:
Improve the quality of the compressed audio. Playback sound of lossy
compressed files such as MP3 will be improved. The setting can be separately set
to each input selector. The setting is effective with 2 ch signals with a sampling
frequency of 48 kHz or less. The setting is not effective in the bitstream signals.
This function works in the Stereo, Mono, All Ch Stereo, and Full Mono listening
modes.
Late Night:
Make small sounds easily heard. It is useful when you need to reduce the volume
while watching a movie late night. You can enjoy the effect only when playing
Dolby series and DTS series input signals.
The setting cannot be used in the following cases.
– If "Loudness Management" is set to "Off" when playing Dolby Digital Plus or
Dolby TrueHD
– When the input signal is DTS:X and "Dialog Control" is other than 0 dB