Onkyo TX-RZ3100, Руководство пользователя

Страница: 21 / 159

Default Value: 12' 0" / 3.60 m
Specify the distance between each speaker and the listening position.
Subwoofer 2
Default Value: 12' 0" / 3.60 m
Specify the distance between each speaker and the listening position.
Default values vary depending on the regions.
Distance units can be switched by pressing MODE on the remote controller.
When the unit is set as feet, you can set between 0' 0" 1/2 and 30' 0" in
increments of 1/2. When the unit is set as meters, you can set between 0.01 m
and 9.00 m in increments of 0.01 m.
4. Level Calibration
Front Left
Default Value: 0.0 dB
Select a value between "
－
12.0 dB" and "
＋
12.0 dB" (in 0.5 dB increments).
A test tone will be output each time you change the value. Select the desired
level.
Center
Default Value: 0.0 dB
Select a value between "
－
12.0 dB" and "
＋
12.0 dB" (in 0.5 dB increments).
A test tone will be output each time you change the value. Select the desired
level.
Front Right
Default Value: 0.0 dB
Select a value between "
－
12.0 dB" and "
＋
12.0 dB" (in 0.5 dB increments).
A test tone will be output each time you change the value. Select the desired
level.
Height 1 Left
Default Value: 0.0 dB
Select a value between "
－
12.0 dB" and "
＋
12.0 dB" (in 0.5 dB increments).
A test tone will be output each time you change the value. Select the desired
level.
Height 1 Right
Default Value: 0.0 dB
Select a value between "
－
12.0 dB" and "
＋
12.0 dB" (in 0.5 dB increments).
A test tone will be output each time you change the value. Select the desired
level.
Height 2 Left
Default Value: 0.0 dB