Onkyo TX-RZ3100, Руководство пользователя

Страница: 118 / 159

Power
Cannot turn on the unit
Make sure that the power cord is properly plugged into the wall outlet.
Unplug the power cord from the wall outlet, wait 2 minutes or more, then plug it
in again.
The unit turns off unexpectedly
The unit automatically switches to standby when the "Hardware" ­ "Power
Management" ­ "Auto Standby" setting in the Setup menu functions.
(Models with built­in amplifiers only) If you play at high volumes or allow input
of excessive bass, the protection circuits in the amplifier can be tripped which
may suddenly turn the unit off. Try the following if this occurs.
– Reduce the volume
– Select under 100 Hz for each of the speakers in "Speaker" ­ "Equalizer
Settings" in the Setup menu, and reduce the volume compared to the
current setting.
– In "Speaker" ­ "Crossover" in the Setup menu, set "Front" to the crossover
frequency value other than "Full Band" or set "Front" to "Full Band" and set
"Double Bass" to "On"
(Models with built­in amplifiers only) If the power turns off and indicators on the
front panel continually blink, or the following error messages appear on the
display, there may have been a malfunction with the amplifier or the protection
circuit may have tripped.
– If "CHECK SP WIRE" is displayed:
The wires in the speaker cables may have touch the rear panel or other
wires. Twist the wires again properly and make sure they do not stick out of
the speaker terminals when connecting.
– If "FAN STOP" is displayed:
The internal cooling fan has malfunctioned. Unplug the power cord from the
wall outlet immediately and contact the dealer or our company's support.
– If "AMP OVERHEAT" is displayed:
The temperature inside the unit has exceeded the admissible value. Make
sure the unit has plenty of space for ventilation around it, wait for the unit to
cool down sufficiently, and then try turning it on again.
– If "AMP ERR" is displayed:
It is possible that the amplifier circuits in the unit have malfunctioned. Wait
for at least a minute and then turn the unit on again.
If the same symptoms such as being unable to turn the unit on happen
repeatedly, unplug the power cord from the wall outlet immediately and contact
the dealer or our company's support.
WARNING: If smoke, smell or abnormal noise is produced by the unit, unplug the
power cord from the wall outlet immediately and contact the dealer or our
Troubleshooting