Onkyo TX-RZ3100, Руководство пользователя

Страница: 38 / 159

Set the Zone 2 volume level of when this unit is turned on. Select a value
from "Last" (Volume level when the unit was turned off), "Min", "0.5" to "99.5"
and "Max". (When "3. Audio Adjust" ­ "Volume" ­ "Volume Display" is set to
"Absolute")
You cannot set a higher value than that of "Maximum Volume".
2. Zone 3
Output Level
Default Value: Fixed
Select which of the integrated amplifier in a separate room or this unit should
be used to adjust the volume when Zone 3 is active.
"Fixed": Adjust on the Integrated amplifier in a separate room
"Variable": Adjust on the unit
Maximum Volume
Default Value: Off
Set the maximum value for Zone 3 to avoid too high volume. Select a value
from "Off", "50" to "99". (When "3. Audio Adjust" ­ "Volume" ­ "Volume
Display" is set to "Absolute")
Power On Volume
Default Value: Last
Set the Zone 3 volume level of when this unit is turned on. Select a value
from "Last" (Volume level when the unit was turned off), "Min", "0.5" to "99.5"
and "Max". (When "3. Audio Adjust" ­ "Volume" ­ "Volume Display" is set to
"Absolute")
You cannot set a higher value than that of "Maximum Volume".
7. Miscellaneous
Change the frequency step for the tuner, update the firmware, and perform Initial
Setup, etc.
1. Tuner
AM / FM Frequency Step (North American models)
Default Value: 10 kHz / 0.2 MHz
Select a frequency step depending on your area of residence.
Select "10 kHz/0.2 MHz" or "9 kHz/0.05 MHz".
When this setting is changed, all radio presets are deleted.
AM Frequency Step (European and Asian models)
Default Value: 9 kHz
Select a frequency step depending on your area of residence.
Select "10 kHz" or "9 kHz".
When this setting is changed, all radio presets are deleted.