Onkyo TX-NR545, Руководство пользователя

Страница: 80 / 298

Default Value: No
Set whether your front speaker connection is bi­amp.
"No": When front speakers are connected in a normal manner
"Yes": When front speakers are bi­amp connected
If an item cannot be selected even though connection is correct,
check that the settings in "Speaker Channels" matches the number
of connected channels.
Powered Zone 2
Default Value: No
Set the connection of speakers to Zone 2 speaker terminals.
"Yes": When speakers are connected to ZONE2 speaker terminals
"No": When speakers are not connected to ZONE2 speaker terminals
This item will be set to "No" when "Bi­Amp" is set to "Yes".
Crossover
Allows you to change speaker configurations, such as crossover frequency.
Settings are automatically configured if you use the Automatic Speaker
Setup. Audio will not be output while you are making this setting.
Front
Default Value: 100 Hz
Select the crossover frequency from "40Hz" to "200Hz" to start
outputting frequencies for each channel.
"Full Band": Full band will be output.
If "Configuration" ­ "Subwoofer" is set to "No", "Front" will be fixed to
"Full Band" and the low pitched range of the other channels will be
output from the front speakers. Refer to the instruction manual of
your speakers to make the setting.
Center
Default Value: 100 Hz
Select the crossover frequency from "40Hz" to "200Hz" to start
outputting frequencies for each channel.
"Full Band": Full band will be output.
"Full Band" can be selected only when "Front" is set to "Full Band".
If an item cannot be selected even though connection is correct,
check that the settings in "Configuration" ­ "Speaker Channels"
matches the number of connected channels.
Height
Default Value: 100 Hz