Onkyo TX-NR545, Руководство пользователя

Страница: 152 / 298

About DTS signals
When DTS program material ends and the DTS bitstream stops, the unit
remains in DTS listening mode and the dts indicator remains on. This is
to prevent noise when you use the pause, fast forward, or fast reverse
function on your player. If you switch your player from DTS to PCM, you
may not hear any sound because the unit does not switch formats
immediately. In such case, you should stop your player for about 3 or
more seconds and then resume playback.
With some CD and LD players, you will not be able to playback DTS
material properly even though your player is connected to a digital input
on the unit. This is usually because the DTS bitstream has been
processed (e.g., output level, sampling rate, or frequency response
changed) and the unit does not recognize it as a genuine DTS signal. In
such cases, you may hear noise.
When playing DTS program material, using the pause, fast forward, or
fast reverse function on your player may produce a short audible noise.
This is not a malfunction.
Troubleshooting