background image

 

52

 

Enjoying Surround Sound

 

The DVD receiver will provide you a full-fledged home 
theater, when it is added on extra speakers in addition to 
the two front speakers. (For information about how to 
add on, see page 23.)
The factory default settings support the two channels 
with only a left and a right front speakers; you must con-
figure the settings according to the number of the speak-
ers you have added on.

 

Notes:

 

• After you have changed the number of the connected 

speakers, you must configure the number, because the 
surround effect is subject to change according to the 
number of the combined speakers.

• If you want to abort the setting, press “RCV SETUP”.

 

Configuring Subwoofer and Setting 
Up the Number of Speakers

 

1

 

Press RCV SETUP.

 

The display will show “1.Sp Config”.

 

2

 

Press ENTER.

 

The display will show “Subwfr :No”.

 

3

 

Press 

/

 to switch “Yes” and 

“No”.

 

Yes :

 

 Deep bass will be output from a 

subwoofer.

 

No :

 

 Deep bass will not be output from a 

subwoofer.

Configure the output setting for a 
subwoofer to “No” when the output from 
it is unneeded, even if it is connected.

 

4

 

Press 

/

 to select “Speaker:”.

RCV SETUP

RETURN

ENTER

/

/

 

5

 

Press 

/

 (repeatedly) to select 

the number of the connected 
speakers.

 

2ch: 

 

Only a left and a right front 

speakers.

 

5ch: 

 

A center speaker and a left and a 

right surround speakers in addition 
to a left and a right front speakers.

 

6

 

Press RETURN.

 

Returns to the display shown in step 1. 
Go to “Setting Distance of Speakers” at 
page 53.

Содержание DR-815





















































































Отзывы: