Onkyo D-SX7A Скачать руководство пользователя страница 6

 

6

 

Care and Handling

 

Speaker care

 

Wipe the cabinet occasionally with a dry, soft cloth. For 
heavier dirt, after dampening a soft cloth in a weak solu-
tion of mild detergent and water and wringing it out thor-
oughly, wipe off the dirt. Then, dry the unit immediately 
with a clean cloth. Do not use rough material, thinners, 
alcohol or other solvents, since these could damage the 
finish, remove the panel lettering, or cause discoloration. 
If you are using a chemical cloth, always follow the instruc-
tions that come with the cloth. For dust accumulated on 
grilles, use a vacuum cleaner or brush off the dust.

 

Using the speakers with a TV set or computer

 

In general, Braun tubes used for color television sets 
and computers are extremely sensitive and can be 
affected even by the magnetism of the earth. If a 
speaker system is used near them, therefore, discolor-
ation or distortion of pictures will occur. 
To permit use with a color television set or computer, 
this speaker system features magnetic shielding. Even 
so, discoloration may still result, depending on the 
installation environment. If discoloration occurs, turn 
off the power to the television set or computer, wait for 
15 to 30 minutes and then turn it on again. This acti-
vates the self-demagnetizing function of the television 
set or computer, improving the display condition.

 

Note

 

If discoloration persists even after you perform this remedy, 
move the speaker away from the television set or computer. 
Discoloration may also be caused when a magnet or other 
magnetizing object is placed near the television or com-
puter.

 

Precautions on speaker use

 

This speaker system can handle the specified input 
power when it is used for ordinary music reproduction. 
However, if the following abnormal signals are fed to 
the speaker, the internal circuits may be overloaded, 
resulting in burning or breakage of the wires even if the 
input power is below the specified rating.

• Noise produced when FM station is not tuned in.
• Sound produced when fast-forwarding cassette 

tape deck

• High-frequency sound generated by an oscillator, 

electronic musical instruments, etc.

• Oscillating amplifier signals
• Special test signals produced by an audio test CD, 

etc.

• Sound produced when connecting or disconnecting 

audio connection cables. (Always turn off the ampli-
fier’s power before connecting or disconnecting 
cables.)

• Feedback when a microphone is used

 

About memory preservation

 

This unit features an auxiliary power source to pre-
serve memory presets from being erased during 
power outage.
If the power cable is disconnected, this unit preserves 
memory for about two weeks.

 

Precautions for Handling 
Compact Discs (CDs)

 

Important notes on handling CDs

 

• Carefully lift the disc from the 

disc case, making sure to 
hold the disc by its edges or 
the hole in the middle.

• You can use a soft, dry cloth 

to wipe dust and fingerprints off 
the surface of CDs. 
Do not use volatile agents, such 
as thinner or benzene, on discs. 
Also, do not use conventional 
record cleaner or antistatic 
agents.

 

Notes

 

• Do not place CDs in direct sunlight or in locations subject 

to high humidity or low temperature.

• Do not store a CD in the unit’s disc tray for a long period 

of time.

 

Playable discs

 

This unit can play the following types of discs.

You cannot play discs other than those listed above.

Avoid using heart-shaped or octagonal discs. Playing 
irregularly-shaped discs may damage the internal 
mechanism of the unit.
Do not use discs that carry a residue from adhesive tape, 
rental discs that have peeling labels, or discs that have 
custom labels or stickers. Otherwise, you may not be able 
to eject the discs, or the unit may become inoperative.

 

About playing copy-controlled CDs

 

Some copy-controlled CDs may not conform to official 
CD standards. They are special discs and may not 
play on the FR-X7A.

Do not use discs that are not audio discs (i.e., CD-
ROMs designed for use with personal computers), as 
these could damage the speakers and amplifier. 

 

Disc mark

Contents

Disc size

 

Audio 

CDs

 

Audio

12 cm

8 cm

(CD single)

Содержание D-SX7A









































































Отзывы: