26
Programming FM Stations Automatically — Auto Preset
Auto presets store the frequencies of radio stations into memory so you can select your favorite
channels without tuning manually. Radio station signals can be automatically located and
stored. This function does not apply to AM stations (see the previous page).
Turn on the power to the unit before you start the pro-
cedure.
Note
Auto presetting may store noise instead of a station with a
clear signal to some preset channels, depending on your loca-
tion. In such cases, erase the preset manually (see page 50).
The following additional functions are available:
• Naming a preset channel (see page 52)
• Erasing a preset channel (see page 50)
• Copying the radio station in the selected channel to
another (see page 51).
2-4
2
1
DISPLAY
If any radio stations are preset before you start
the auto preset procedure, they will be replaced
with new presets.
Before auto presetting
1
Press INPUT
/
to display
“FM.”
To improve the FM reception, adjust the
antenna position.
2
Press
EDIT
/NO/CLEAR and turn
MULTI JOG to display “AutoPre-
set?”
3
Press MULTI JOG.
The confirmation message “AutoPre-
set??” appears in the display.
To stop auto presetting, press EDIT/
NO/CLEAR.
4
Press MULTI JOG.
Auto presetting starts.
You can preset up to 20 stations. The
preset stations will be automatically
sorted in frequency order.
SOURCE
SOURCE
CH
Customizing the preset channels