manualshive.com logo in svg

Onkyo D-SX7A, Инструкция по эксплуатации, Страница: 57 / 72

Поделиться
Скачать
Onkyo D-SX7A Скачать руководство пользователя страница 57

57

Editing Tracks—Continued

• You can execute this function only when the input 

source is MD and the unit is stopped or paused.

• To cancel the operation, press MD  .

If you move a track, the track may end up belonging to 
a different group. See the example below.

Moving the selected track – Move

1

Insert the MD, then select MD as 
the source.

Use a recordable MD with the record-
protect tab closed.

2

Turn MULTI JOG to select a track 
to move.

3

Press 

EDIT

/NO/CLEAR and turn 

MULTI JOG until “Move?” 
appears in the display.

4

Press MULTI JOG.

The destination track number appears, 
pointed to by an arrow.

1

2-6

3

1

DISPLAY

SOURCE

Destination track number

5

If necessary, turn MULTI JOG to 
change the destination track 
number.

6

Press MULTI JOG to move.

“Complete” appears in the display.
The selected track is moved and all the 
tracks are renumbered from the top.

Moving a track to a different group

The selected number will 
become this number.

1

2

3

5

4

1

3

5

4

2

1

2

5

3

4

Moving the selected track

Renumbering the tracks

1 Tr ~ 9 Tr

10 Tr ~ 19 Tr

20 Tr ~ 25 Tr

20 Tr ~ 25 Tr

20 Tr ~ 25 Tr

1G

2G

3G

1 Tr ~ 10 Tr

11 Tr ~ 19 Tr

1G

2G

3G

15 Tr

1G

2G

3G

6 Tr

Moving Tr.15 to Tr.6

A track moved from Tr.15 to Tr6 now 
belongs to Group 1, instead of Group 2.

Before moving a track

Содержание D-SX7A









































































Отзывы:

Нет отзывов