109
≫
≫
≫
≫
≫
≫
No image from a device connected to HDMI IN jack
• To display video from the connected player on the TV while the unit is in standby, you need to enable "5. Hardware" - "HDMI" - "HDMI Standby
Through" on the Setup menu. For details of the HDMI Standby Through function, check "5. Hardware" - "HDMI" on the Setup menu.
• To output video to a TV connected to the HDMI OUT SUB jack, press the AUDIO button on the remote controller to display "AUDIO Menu" and
select "HDMI" - "HDMI Out" and select the HDMI OUT jack.
• Check if "Resolution Error" is displayed on the main unit display when video input via HDMI IN jack is not displayed. In this case, the TV does not
support the resolution of the video input from the player. Change the setting on the player.
• Normal operation with an HDMI-DVI adapter is not guaranteed. In addition, video signals output from a PC are not guaranteed.
(
)
Images flicker
• The output resolution of the player may not be compatible with the resolution of the TV. If the player is connected to this unit with an HDMI cable,
change the output resolution on the player. Also this may be solved by changing the screen mode on the TV.
Video and audio are out of synch
• Depending on the settings on your TV and connection environment, the video may be behind the audio. Press AUDIO on the remote controller to
display "AUDIO Menu", select "HDMI" - "A/V Sync", and make the adjustment.
(
)
Linked operation
HDMI linked operation does not work with CEC-compliant devices, such as a TV
• In the Setup menu of the unit, set "5. Hardware" - "HDMI" - "HDMI CEC" to "On".
• It is also necessary to set HDMI linking on the CEC-compliant device. Check the instruction manual.
(
)
Tuner
Poor reception or much noise
•
Recheck the antenna connection.
• Move the antenna away from the speaker cord or power cord.
• Move the unit away from your TV or PC.
•
Passing cars or airplanes in the vicinity can cause interference.
• If radio waves are blocked by concrete walls, etc., radio reception may be poor.
•
Change the reception mode to mono (
•
Operating the remote controller during AM reception may cause noise. (North American models)
• FM reception may be clearer if you use the antenna jack on the wall used for the TV.
(
)
Содержание 243989
Страница 10: ...10 Contents Connections Playback Setup Front Panel Rear Panel Remote Part Names Front Panel For details see p11...
Страница 14: ...14 Contents Connections Playback Setup Front Panel Rear Panel Remote European models 180 90 For details see p15...
Страница 121: ...SN 29403724_EN C Copyright 2019 Onkyo Pioneer Corporation Japan All rights reserved http www onkyo com privacy F1908 0...
