A d j u s t m e n t M a n u a l
I
2
C
Item
Colour Adjustment (PAL) Adj.Process 2AL
3G(UE-DLX)
M o d e l
ALL
Measuring
Equipment
* Oscilloscope
Preparation
before Adj.
* Warm up the receiver for more than 30 minutes.
* Adjust the PICTURE MODE to [DYNAMIC] mode.
Adjustment
1) Receive the PAL colour bar pattern signal .
2) Connect the probe of the oscilloscope to
green cathode.
3)
Select
Sub color
in the Service Menu.
4)
Adjust
the
Sub color
so that the value
between the white peak & blue as per
below table.
Model Adj.Point
14/20/21” +3V
Note: While entering in the SERVICE MENU by default it takes the
value of VSM cartoon, hence the above parameter is adjusted with
respect to cartoon condition.
15
