A d j u s t m e n t M a n u a l
S e r v i c e m e n u
Adj.Process
3G(UE-DLX)
M o d e l
ALL
[1] The following display comes on the screen by pressing DISPLAY key
and VSM key at the same time.
FACTORY
SERVICE
MODE
Then, press CURSOR UP OR DOWN key to be in Service menu.
To select Service Menu parameters use CURSOR UP OR DOWN
key and to adjust these parameters use CURSOR LEFT OR
RIGHT key
H-LINE
1) To get H-line press VSM and DISPLAY Simultaneously.
2) Press CURSOR UP KEY to get R CUTOFF.
3) Press '0' to get H-line.
4) To come out of H-line again press '0'.
VSM PRESET
There are FOUR VSM
PRESETS.(CARTOON,FILM/POP,NEWS,)
For the setting of individual VSM PRESETS
1. Press VSM and DISPLAY at the same time.
2. Press CURSOR DOWN key to get the Setting for the
VSM PRESET.
3. Press CURSOR DOWN key for the selection of each
parameter.
4. Use CURSOR LEFT/RIGHT key for their setting as per
the table given below.
5. Press VSM Key for selection of VSM PRESETS.
7
