Onfloor Propel, Руководство по эксплуатации

Страница: 29 / 90

MAINTENANCE
27
The hopper dust filter filters the air pulled
up through the hopper. The dust filter is
equipped with a filter shaker to remove the
accumulated dust.
Operate the filter shaker before emptying
the hopper and at the end of every work shift.
Check and clean the filter every 100 hours
of operation. Replace filter if damaged.
To clean the hopper dust filter, use one of
the following methods:
Shaking – Pull and push the filter shaker
knob 5 or 6 cycles.
Tapping – Remove the dust filter and tap
it gently, dirty side down, on a
smooth surface. Do not damage
the seal or the edges of the filter
or it will not seal properly.
Vacuum – Remove the dust filter and
vacuum the dirty side of the filter.
HOPPER DUST FILTER