Onfloor Propel, Руководство по эксплуатации

Страница: 15 / 90

OPERATION
1. Raise the sweeper only high enough to
clear the ground and drive slowly to the
sweeping area.
FOR SAFETY: Do not raise the sweeper
off of the ground unless the body of the
sweeper is in line and centered with the
fork tube.
Note: Raise the sweeper off of the
ground before driving the forklift
in reverse. Attempting to drive the
forklift in reverse with the sweeper
on the ground may result in damage
to the sweeper.
2. Slowly lower the sweeper to the ground.
3. Tilt the forklift forks until the body of the
sweeper is level (parallel to the ground).
“QUICK LEVEL”
“Quick level” is a simple method for
leveling the sweeper. To “quick level”
the sweeper, check the positions of the
sides brooms and the rear skirt.
The side brooms should have correct
contact the ground (not lifted off the
ground or pushed into the ground).
“Quick level” allows the operator to
adjust the tilt of the sweeper, even while
sweeping, from the operator position.
After the initial adjustment, simply check
the rear skirt and adjust the fork height as
necessary.
4. Adjust main broom and sidebroom.
NOTE: In order for “quick level “to be effective,
the side brooms and rear skirt
must be properly adjusted.
13
SWEEPING
#ORRECT
)NCORRECT
#ORRECT
)NCORRECT