17
General Safety Precautions
This machine is designed for surfacing concrete and sanding wood floors. All operators
and maintenance personnel should read and understand the safety procedures with
this floor machine.
1)
All personnel in the immediate work area must wear safety glasses with side shields whenever the
machine is in operation. Protective clothing is also recommended. Long sleeve shirts and safety shoes
should be worn. Avoid wearing loose clothing.
2) DO NOT
attempt to service or replace attachments while the machine is running or connected to a
power source.
3) DO NOT
operate this floor machine in the rain or in areas where liquids could enter the electrical
components of the machine.
4)
Keep the power cord away from the revolving heads to avoid damage.
5)
Check main power supply to assure that you are connecting the equipment to a proper dedicated
service.
Machine Maintenance
1)
Unplug the machine.
2)
After each use, wipe off machine with a clean cloth.
3)
Empty the vacuum you are using in accordance with specific manufacturer’s safety & operation
instructions.
4)
Remove the dust cover from the bottom of the machine and vacuum out the inner bowl.
5)
Check for loose parts and fasteners.
6)
Check the power cord for any breaks in the wire. Breaks will most likely occur near the plug
or switch. Repair or replace any breaks immediately.
