One Stop Systems EB3200, Руководство пользователя

Страница: 19 / 85

One Stop Systems
ExpressBox 3200 | 2 Hardware Installation 19
2.6 Install PCIe Cards
It is highly recommended to install third party PCIe cards / High Power PCIe cards after you have verified and tested that the OSS expansion
chassis is functional and free of hardware failures.
When installing PCIe card, start with one card first just to see if there are any software and/or hardware issues or incompatibility problems that
may occur. This way you can troubleshoot the problem more easily and efficiently. If everything works well with one card and there are no
configuration issues, you can proceed with the installation of the remaining cards.
Remove slot covers and install PCIe cards.
Make sure that all cards are fully seated in their PCIe card slots. When correctly seated, there will be a firm resistance when you pull up gently
on the card. To keep the cards in place, secure them in the enclosure with their retaining screws. After securing the cards verify that they do
not touch each other.
Some card manufacturers recommend that you install their software driver prior to installing the card. If this is the case, be sure to install the
card driver before connecting the expansion chassis the computer.

Slot 3 accepts all types of PCIe cards x1, x2, x4, x8 or x16 (mechanically).

Slot 2 accepts all types of PCIe cards x1, x2, x4, x8 or x16 (mechanically).

Slot 1 accepts all types of PCIe cards x1, x2, x4, x8 or x16 (mechanically).
Always refer to or read “3
rd
party manufacturer installation guide” for further instructions