O
NE
F
OR
A
LL
6-D
EVICE
PVR U
NIVERSAL
R
EMOTE
C
ONTROL
10 Using Keymover
2.
You will see the devices turn on or off
according to your programmed
sequence.
NOTE:
The currently-selected device will
always turn on first, followed by the
remaining programmed sequence. After the
master power sequence is complete, the
remote will control the first powered-on
device.
NOTE:
If one or more devices does not have a
POWER
key, the power off/on sequence may
be slightly delayed when the remote control
signals the device(s). This action is normal.
C
LEARING
M
ASTER
P
OWER
1.
Press and hold
SET
until the LED (red
light) blinks twice, then release
SET
.
2.
Enter
9 9 5
. The LED will blink twice.
Then press
POWER
once.
3.
Press and hold
SET
until the LED blinks
twice, then release
SET
. Master Power is
now cleared.
USING KEYMOVER
The One For All 6-Device PVR Universal
Remote Control (URC-6131nw) includes a
Keymover feature that allows you to map (or
copy) keys from one mode (i.e., source
mode) to another mode (i.e., destination
mode).
NOTE:
The following keys cannot be used as a
source or destination:
TV
,
PVR
,
DVD
,
CBL/SAT
,
AUD
,
VCR
, and
SET
.
P
ROGRAMMING
K
EYMOVER
For example, if your VCR does not have
volume control, you can map those keys
(i.e.,
VOL +
,
VOL -
, and
MUTE
) from the TV
mode to the VCR mode as follows:
1.
Press and hold
SET
until the LED (red
light) blinks twice, then release
SET
.
2.
Enter
9 9 4
. The LED will blink twice.
3.
For the source mode, press
TV
once.
4.
For the source key, press
VOL +
once.
5.
For the destination mode, press
VCR
once.
6.
For the destination key, press
VOL +
once.
7.
The LED will blink twice, indicating
the keymoved sequence is correct.
8.
Repeat steps 1 through 7 twice more to
map remaining volume control keys,
substituting
VOL -
and
MUTE
as source
and destination keys in steps 4 and 6.
Upon completion of the above procedure,
you can now use your One For All 6-Device
PVR Universal Remote Control (URC-
6131nw) to control the TV’s volume and
MUTE
in the
VCR
mode, as well as in the
TV
mode.
R
ESTORING
K
EYMOVED
K
EYS
TO
D
EFAULT
S
ETTINGS
Restoring a Single Keymoved Key
1.
Press a device key that has a keymoved
key.
2.
Press and hold
SET
until the LED (red
light) blinks twice, then release
SET
.
3.
Enter
9 9 4
. The LED will blink twice.
4.
Press the destination key twice (where
the keymoved key is stored). The LED
will blink twice.
Restoring All Keymoved Keys in a Single
Mode
1.
Press and hold
SET
until the LED (red
light) blinks twice, then release
SET
.
2.
Enter
9 9 4
. The LED will blink twice.
PVR 6 Owners Manual.fm Page 10 Monday, December 20, 2004 11:17 AM
