One for All ONE FOR ALL PVR 6, Руководство пользователя

Страница: 13 / 45

O
NE
F
OR
A
LL
6-D
EVICE
PVR U
NIVERSAL
R
EMOTE
C
ONTROL
12 Troubleshooting
U
NLOCKING
V
OLUME
C
ONTROL FOR A
S
INGLE
D
EVICE
(I
NDIVIDUAL
V
OLUME
U
NLOCK
)
1. After performing Global Volume Lock
(see above), press a desired mode key
where you want volume to be unlocked
(e.g.,
AUD ) and controlled within its
own mode.
2. Press and hold SET until the LED (red
light) blinks twice, then release SET .
3. Enter 9 9 3 and then press VOL - once.
The LED will blink four times.
4. If desired, repeat steps 1 through 3 (of
this section) for each device that you
want volume to be unlocked.
5. Now, after you select a device that has
volume unlocked (e.g.,
AUD ), pressing
VOL + , VOL - , or MUTE , will control the
device’s volume only in its own mode.
U
NLOCKING
A
LL
V
OLUME
C
ONTROL
(
R
ESTORING
D
EFAULT
S
ETTING
)
NOTE:
Performing these instructions will
restore independent volume control for all
programmed devices (e.g., TV volume control
in
TV
mode, VCR volume in
VCR
mode, etc.).
1. On the remote control, press and hold
SET until the LED (red light) blinks
twice, then release SET .
2. Enter 9 9 3 and then press VOL + once.
The LED will blink four times.
3. Volume will again be independently
controlled according to its default
states for all programmed devices.
TROUBLESHOOTING
PROBLEM: LED (red light) does not
blink when you press a
key.
SOLUTION: Replace batteries with two
new AAA alkaline
batteries.
PROBLEM: LED blinks when you
press a key, but home
entertainment device does
not respond.
SOLUTION: Make sure the remote
control is aimed at your
home entertainment
device and is not farther
than 15 feet away.
PROBLEM: The unit does not control
home entertainment
devices or commands are
not working properly.
SOLUTION: Try all listed codes for the
device brands being set
up. Make sure they can be
operated with an infrared
remote control.
PROBLEM: DVD/VCR Combo does
not respond properly.
SOLUTION: Use the VCR codes for your
brand. Some combo units
may require both a
DVD
code and a VCR code for
full operation.
PROBLEM: Changing channels does
not work properly.
PVR 6 Owners Manual.fm Page 12 Monday, December 20, 2004 11:17 AM