TMK
0240, 0036, 0208
Toshiba
0043, 0045, 0066, 0210, 0212
Totevision
0037, 0240
Unitech
0240
Vector Research
0038, 0040
Vector
0045
Video Concepts
0040, 0045, 0061
Videosonic 0240
Wards
0000, 0035, 0042, 0047, 0048, 0060, 0062,
0072, 0081, 0149, 0212, 0240
White
Westinghouse
0278, 0479, 0209, 0184
XR-1000
0000, 0035, 0072
Yamaha
0038
Zenith
0039, 0000, 0033, 0034
Setup Codes For TV/VCR Combos
American
High
0035*
Brocksonic 0002, 0294, 0479
Colt
0072
Curtis Mathes
0035*
Daewoo
0278*
Emerson
0002, 0294, 0479
Funai
0000
GE
0035*, 0060*, 0048*, 0240
Hitachi
0035*, 0000
HQ
0000
Lloyds
0000
Magnavox
0000, 0035*, 0081*
Magnin
0240
Memorex
0037, 0162*
MGA
0240
Mitsubishi
0048*
Orion
0002, 0294, 0479
Panasonic
0035*, 0162*
Penney’s
0035*, 0240, 0162*
Quasar
0035*, 0162*
RCA
0035*, 0060*, 0048*
Sansui
0000, 0479
Sanyo
0240
Sears
0000, 0037
Sony
0032*
Symphonic 0000
NOTE: If your TV/VCR is working on one of the above
codes highlighted with an asterisk (*), you may need to
program a separate TV code in order to control the volume.
Check the list of codes below and follow the instructions
detailed in the “Programming the Cinema 6 to Operate
Your TV” section to program the supplied TV code.
TV/VCRs working on VCR code 0032 may require
TV code 0000 for volume control.
TV/VCRs working on VCR code 0035 may require
TV code 0051 for volume control.
TV/VCRs working on VCR code 0048 may require
TV code 0093 for volume control.
TV/VCRs working on VCR code 0060 may require
TV code 0047 for volume control.
TV/VCRs working on VCR code 0081 may require
TV code 0054 for volume control.
TV/VCRs working on VCR code 0162 may require
TV code 0250 for volume control.
TV/VCRs working on VCR code 0278 may require
TV code 0451 for volume control.
Programming the Cinema 6 to operate your DVD or
Laser Disc Player:
Locate the brand name of your DVD or Laser Disc Player
and then write it in the space below.
DVD/LD Brand:
Locate the brand name of your DVD or Laser Disc Player
in the “Setup Codes For DVD or Laser Disc Players”
section. The brands are listed in alphabetical order with
the most popular codes listed first. You will use one of
these codes to program your
Cinema 6 to operate your
DVD or Laser Disc Player.
To program the
Cinema 6 to operate your DVD or Laser
Disc Player:
1.
Turn on your DVD or Laser Disc Player and
insert a disc.
2.
Press DVD/LD and release. Press and hold
SETUP until the
Cinema 6’s red light blinks
twice, then release SETUP.
3.
Enter the first four-digit DVD or Laser Disc Player
code listed for your brand in the “Setup Codes
For DVD or Laser Disc Players” section. If you
perform this procedure correctly, the red light will
blink twice when you enter the final digit of your
code.
4.
Aim the
Cinema 6 at your DVD or Laser Disc
Player and press POWER. Your DVD or Laser
Disc Player should turn off. If your DVD or Laser
Disc Player does not respond, repeat steps 2-4,
trying each code listed for your brand until you
find the one that operates your DVD or Laser Disc
Player.
5.
Your
Cinema 6 is now programmed to operate
your DVD or Laser Disc Player.
Write your DVD or Laser Disc Player code in the
boxes to the left for future reference.
Remember, if you want to use your
Cinema 6
to operate your
DVD or Laser Disc Player, press the
DVD/LD
key first.
Zenith
0000
Setup Codes for DVD Players
JVC
0558
Kenwood
0534
Mitsubishi
0521
Panasonic
0490
Philips
0539
Pioneer
0525
RCA
0522
Sony
0533
Toshiba
0503
Zenith
0503
Setup Codes for Laser Disc Players
Mitsubishi
0059
NAD
0059
Pioneer
0059
Programming the
Cinema 6 to operate your Receiver/
Tuner:
Locate the brand name of your Receiver/Tuner and then
write it in the space below.
Receiver/Tuner Brand:
Locate the brand name of your Receiver/Tuner in the “Setup
Codes For Receivers/Tuners” section. The brands are listed
in alphabetical order with the most popular codes listed first.
You will use one of these codes to program your
Cinema 6
to
operate your Receiver/Tuner.
To program the
Cinema 6
to operate your Receiver/Tuner:
1.
Turn on your Receiver/Tuner.
2.
Press RCVR and release. Press and hold SETUP
until the
Cinema 6’s red light blinks twice, then
release SETUP.
3.
Enter the first four-digit Receiver/Tuner code listed
for your brand in the “Setup Codes For Receivers/
Tuners” section. If you perform this procedure
correctly, the red light will blink twice when you
enter the final digit of your code.
4.
Aim the
Cinema 6 at your Receiver/Tuner and
press POWER. Your Receiver/Tuner should turn
off. If your Receiver/Tuner does not respond,
repeat steps 2-4, trying each code listed for your
brand until you find the one that
operates your Receiver/Tuner.
5.
Your
Cinema 6 is now programmed to operate
your Receiver/Tuner. Write your Receiver/Tuner
code in the boxes to the left for future reference.
Remember, if you want to use your
Cinema 6
to operate your
Receiver/Tuner, press the
RCVR key first.
